Product Name: Double Routes Forming Production
Line For Baby Diaper Model: CBT-SNE-3 Place of Origin: CHINA
Product Description
Main functions and features: 1.Driving system consists of synchronous belt (
Opt belt, made in Germany) and round arc gear
combined with gear case; The key parts adopt NSK
bearing (made in Japan) for smooth transmission,
prolonging the lifetime of the machine. The
functions are complete. It can produce diapers of
economic type and high grade. It can produce three
types of products (L,M,S) with a few parts changed.
Changing is very easy. 2.Dual route forming system with wrapping by tissue,
using large and small cotton cores. The products are
economic and practical. SAP may be supplied at a
fixed amount in designed locations or in a mixing
way. 3.It has elastic waist, frontal waist tape and side
waist tape. 4.It has three-piece standing cuffs on the surface
.Material for stereo shield is cut and shaped by hot
press on the equipment. It adheres to elastic ribbon
to be formed for side leakage proof. 5.The phase may be adjusted without stopping
machine. 6.Main raw materials are used with unwound, tension
control system and can be filled or changed
automatically. 7.After the side arcs are shaped, the wings will be
three-folded lengthwise. The diaper pads will be
output in line and easy for packing. 8.It can produce 3 sizes of diapers and diaper pad. 9.It has frontal waist tape, side waist tape and
elastic waist . Main Technical Parameters: 1.Type: CBT-SNE-3 2.Design output:(100-150)pieces/min 3.Installation capacity:75KW(380V 50Hz) 4.Overall dimension:(17.5×
1.9× 2.7)m (L × W
× H) 5.Total weight:20T 6.Equipment specification: (length
× width) (it can as
your order)
S:(380× 270)mm M:(450× 310)mm
L:(515× 330)mm XL:(540× 340)mm
Copyright
© Cnbiz4u.com 2000-2007. All Rights Reserved