Product Name: Production line for baby diaper
Model: CBT-SNE-1
Place of Origin: CHINA


Product Description
Main functions and features:
1.The motors are automatic frequency conversion. Driving system consists of synchronous belt ( Opt belt, made in Germany) and round arc gear combined with gear case; The key parts adopt NSK, BEM bearings (made in Japan and Germany) for smooth transmission, Japanese Mitsubishi and German Siemens electronics make the machine more stable prolong the life expectancy. The functions are complete. It can produce diapers of economic type and high grade. It can produce three types of products (L,M,S ) with a few parts changed. Changing is very easy.
2. SAP may be supplied at a fixed amount in designed locations or in a mixing way.
3. It has elastic waist, frontal waist tape and side waist tape.
4. It has three-piece standing cuffs on the surface .Material for stereo shield is cut and shaped by hot press on the equipment. It adheres and hot presses elastic ribbon at the same time for side leakage proof.
5. The phase may be adjusted without stopping machine.
6. Main raw materials are used with unwound, tension control system and thermal pressure system adopts pneumatic unit and automatic raw material feeding is optional.
7. After the side arcs are shaped, the diapers will be three-folded lengthwise. The diaper pads will be output in line and easy for packing.
8. It can produce 3 sizes of diapers and diaper pad.


Specifications
Main Technical Parameters:
1. Type: CBT-SNE-1
2. Design output:250-300 pieces/min
3. Installation capacity:145KW(380V 50Hz)
4. Overall dimension:24m× 2.5m× 3m (length × width × height)
5. Total weight:38T
6. Equipment specification: (length × width) ( it can as your order )S:380mm× 270mm M:450mm× 310mm L:520mm× 330mm XL:540× 340 mm
Optional Device：
1. Non-stop automatic or half-automatic material feeding devices and tension control devices.
2. PLC which can help draw up working procedure.
3. Automatic position-limit adjusting device which can inspect quality ,do the calculation and reject wasters by using photo-electrical cells. (Materials can be adjusted length wisely.)
4. Touchable screen with which you can communicate with the machine.
5. Stacker with photo-electrical counter.


Export Markets
WORD

Payment Details
T/T / L/C

Standard Met
ISO9001